Filter
Top Products
3-63
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with Linksets
The Packet Information sub-section displays the following information for the
selected link:
• Sent Per Sec—Number of packets sent by the linkset per second. This field
initially displays the phrase Waiting for second poll. After two polling
cycles, SGM populates this field with actual calculated rates.
• Received Per Sec—Number of packets received by the linkset per second.
This field initially displays the phrase Waiting for second poll. After two
polling cycles, SGM populates this field with actual calculated rates.
• Drops—Total number of packets that have been dropped by the linkset.
Statistics Tab: Bit Information or Byte Information
To view bit information for the selected linkset (or byte information, if you
cleared the Show Details in Bits Instead of Bytes checkbox in the Preferences
Window), select the Statistics tab.
The Bit Information or Byte Information sub-section displays the following
information for the selected linkset:
• Sent Per Sec—Number of bits or bytes (as set in the Preferences window)
sent by the linkset per second. This field initially displays the phrase Waiting
for second poll. After two polling cycles, SGM populates this field with
actual calculated rates.
• Received Per Sec—Number of bits or bytes (as set in the Preferences
window) received by the linkset per second. This field initially displays the
phrase Waiting for second poll. After two polling cycles, SGM populates
this field with actual calculated rates.