Filter
Top Products
3-325
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
Figure 3-83 Create New Table Dialog
The Create New Table Dialog contains the following fields:
• Variant—SS7 p[rotocol variant. Valid variants are:
–
ANSI
–
China
–
ITU
• Version—Version of the file format to be used by the GTT. Valid versions are:
–
2.0 (MB5, MB6)—Corresponds to ITP software releases 12.2(4)MB5
and 12.2(4)MB6. Allows GTT translation to an application server.
–
3.0 (MB7, MB8)—Corresponds to ITP software releases 12.2(4)MB7
and 12.2(4)MB8. Allows local point codes in GTT tables.
–
3.1 (MB9, MB9a)—Corresponds to ITP software releases 12.2(4)MB9
and 12.2(4)MB9a. Two or more entries in the same application group can
have the same cost. This is the default version in SGM.
–
4.0 (MB10+)—Corresponds to ITP software release 12.2(4)MB10 or
greater. Supports multiple instances on a single node.
SGM 3.0 does not support version 1.0, which corresponds to ITP software
release 12.2(4)MB4. You can load a version 1.0 file into SGM, but fields or
features that are unique to version 1.0 are not displayed, they are removed
from the GTT file the next time it is saved, and the file is saved as a version
2.0 file.
• Instance ID—ID of the instance to be used by the GTT. Valid IDs are 0 to 7.
The default instance ID is 0. This list box is available only if Version 4.0 or
later is selected.