Cisco Systems 78-15589-01 Network Router User Manual


 
3-19
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Discovering the Network
Make this my preferred start option—Specifies whether the selected seed
file is to be loaded automatically whenever this SGM client is started or the
Discovery Dialog is opened. By default, this checkbox is cleared for all seed
files. That is, no seed file is loaded automatically when the SGM client is
started or the Discovery Dialog is opened.
Number of Files—Total number of seed files and folders (displayed in
bottom left corner).
To save the seed file with a new name, use one of the following procedures:
To save the file with a completely new name, enter the new name and click
OK.
To save the file with an existing name, overwriting an old seed file, select the
name in the list and click OK.
SGM saves the seed file with the new name, closes the Save File Dialog: Seed File
List dialog, and returns to the Discovery Dialog.
Note If another user modifies and saves the seed file before you save your
changes, SGM asks if you want to overwrite that user’s changes. If you
choose to do so, the other user’s changes are overwritten and lost. If you
choose not to do so, your changes are lost, unless you save the seed file to
a different filename.
SGM stores the seed file in the seed file directory on the SGM server:
If you installed SGM in the default directory, /opt, then the SGM seed file
directory is /opt/CSCOsgm/seeds.
If you installed SGM in a different directory, then the SGM seed file directory
is located in that directory.
To delete a seed file from the seed file list, select a file and click Delete. SGM
issues an informational message containing the name and location of the deleted
file.
To save any changes you made to the list of files, click OK. SGM saves the
changes and closes the Save File Dialog: Seed File List dialog.
To close the Save File Dialog: Seed File List dialog without saving the seed file
or saving any changes to the seed file list, click Cancel.