Filter
Top Products
Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
3-310
Cisco Signaling Gateway Manager User Guide
78-15589-01
• Post-Conversion Table name—GTT address conversion table to apply after
performing local GTT translation.
If there is an address conversion table name in this field, the referenced table
must exist, and it must contain at least one address conversion entry.
If this field is blank, no address conversion is needed.
• QoS—Quality of service (QoS) class of the selector. Select a value from the
drop-down list box. Valid QoS classes range from 1 through 7. Select ALL if
you want the selector to accept all QoS classes. The default value is ALL.
Enter or select values for the new selector, then click Add. SGM adds the selector
to the Selector Table.
When you are done adding selectors, click Close to close the Selector Add Dialog.
Step 13 (Optional) To add a new GTA entry to a GTA Table, select a GTA Table, then use
one of the following procedures:
• Select Edit > Add from the GTT menu.
• Select Add from the right-click menu.
SGM displays the Selector Add Dialog (Figure 3-76).