Filter
Top Products
Chapter 3 Managing ITP Networks Using SGM
Working with Linksets
3-58
Cisco Signaling Gateway Manager User Guide
78-15589-01
Configuration Data Tab: General Information
To view general information for the selected linkset, select the Configuration
Data tab.
The General Information sub-section displays the following information for the
selected linkset:
• Linkset Type—Type of linkset, which SGM determines by examining the
links defined in the linkset. Possible linkset types are:
–
HSL—The links in this linkset use the SS7-over-ATM (Asynchronous
Transfer Mode) high-speed protocol.
–
SCTPIP—The links in this linkset use the Stream Control Transmission
Protocol (SCTP) IP transport protocol.
–
Serial—The links in this linkset use the serial SS7 signaling protocol.
–
Mixed—The links in this linkset are of two or more types. (This
configuration is not recommended.)
–
Virtual—The links in this linkset are virtual links, which connect
signaling point instances running on the same device. SGM does not poll
virtual linksets, nor does it display real-time data or accounting statistics
for virtual linksets.
–
Other—No links have been defined for this linkset.
• Is Ignored—Indicates whether the linkset is Ignored (that is, whether the
linkset is to be included when aggregating and displaying SGM status
information).
• Inbound ACL—Inbound IP access control list (ACL) number for the linkset.
If there is no inbound ACL for the linkset, this field displays 0.
• Outbound ACL—Outbound ACL number for the linkset. If there is no
outbound ACL for the linkset, this field displays 0.