Filter
Top Products
4-30 Diagnostic Tools
CD-ROM Drive (IDE)
Table 4-21
CD-ROM Drive (IDE) Test Error Codes
Error Code Description Recommended Action
3301-xx CD-ROM drive read test failed. The following steps apply to error codes 3301-xx
through 3305-xx and 6600-xx through 6623-xx:
3305-xx CD-ROM drive seek test failed. 1. Replace the CD and retest.
6600-xx ID test failed. 2. Check the jumper settings on the CD-ROM drive.
6605-xx Read test failed. 3. Verify that the speaker is connected.
6608-xx Controller test failed. 4. Check and/or replace the power and signal cables
and retest.
6623-xx Random read test failed. 5. Replace the CD-ROM drive and retest.
6. Replace the system board and retest.
Tape Drive
Table 4-22
Tape Drive Test Error Codes
Error Code Description Recommended Action
1900-xx Tape drive ID test failed. The following steps apply to error codes 1900-xx
through 1906-xx:
1901-xx Tape drive servo test failed. 1. Replace the tape cartridge and retest.
1902-xx Tape drive format or format verification test
failed.
2. Check the switch settings and terminations on the
tape drive.
1903-xx Tape drive sensor test failed. 3. Check and/or replace the signal cable and retest.
1904-xx Tape drive BOT/EOT test failed. 4. Replace the tape drive and retest.
1905-xx Tape drive read test failed. 5. Replace the system board and retest.
1906-xx Tape drive write/read/compare test failed.