Filter
Top Products
3-34 Removal and Replacement Procedures
8.
Remove the retaining screws and lift the hard drive from the bracket.
Figure 3-32. Removing a hard drive from the hard drive bracket
To reinstall a hard drive in Bays 5 or 6, reverse the above procedure.
CAUTION: Use only 3/16-inch or 5 mm long screws. Using longer screws can
damage the internal components of the drive.
CAUTION: When servicing the workstation, be sure cables are placed in their
proper locations during the reassembly process. Improper cable placement can
damage the computer.