Filter
Top Products
5-7
Compaq Professional Workstation AP500 Maintenance and Service Guide
Advanced Security Management
You can access the following security features through the Computer Setup option on the
Compaq Configuration and Diagnostic menu.
■ Storage (under Built-in Devices)
■ Disable removable media boot ability
■ Disable removable media write ability
■ Communication (under Built-in Devices)
■ Disable serial port
■ Disable parallel port
■ Security Management (under Built-in Devices)
■ QuickLock/QuickBlank
■ Cable Lock Provision
Re-enabling Diskette Boot or Diskette Write
The workstation ships with the Diskette Boot or Diskette Write features enabled. If a user has
disabled the factory settings that allow the workstation to be booted from a diskette or to
prohibit a user from saving data to a diskette, you may need to re-enable the features in order to
service the workstation. To enable Diskette Boot or Diskette Write:
1. Turn on the workstation.
2. When you see the words F10=Setup in the bottom-right corner of the screen, press F10.
NOTE:
If you do not press
F10
while the message is displayed, you must turn off the
workstation, then on again, to access the utility.
3. When prompted, select the desired language.
4. Press
Enter
to bypass the welcome screens and display the Compaq Utilities menu.
5. From the Compaq Utilities menu, select Computer Setup, then press
Enter
.
6. In the Computer Setup window, click Built-in Devices.
7. In the Built-in Devices window, click Storage.
8. Under Removable Media, select the function you want to enable.
9. Save the configuration and exit the utility.
10. Restart the workstation.
NOTE:
Compaq recommends that you establish the Setup Password to prevent another user
from entering the Computer Setup utility and changing any settings.