Filter
Top Products
4-43
Compaq Professional Workstation AP500 Maintenance and Service Guide
Compaq Diagnostics for Windows NT
Compaq Diagnostics for Windows NT allows you to view information about your workstation’s
hardware and software configuration from within the Windows NT environment. To install
Compaq Diagnostics for Windows NT, refer to the Software Installation Guide.
To use Compaq Diagnostics for Windows NT:
1. Double-click the Compaq Diagnostics for Windows NT icon located in the Control Panel.
The screen displays an overview of the workstation hardware and software.
2. For specific hardware and software information, select a category from the Categories
menu or from the toolbar. As you move your cursor over the toolbar icons, the
corresponding category names appear.
3. Click More in the Information Level box to additional detailed information in a selected
category.
Information displayed by Compaq Diagnostics for Windows NT may vary slightly from,
the information presented in the View System Information (INSPECT).
4. Review, print, and if necessary, discuss this information with your authorized Compaq
reseller or service provider. To print the information:
5. Click File, then select Print.
6. Select one of the following options:
❏ Detailed Report (All Categories),
❏ Summary Report (All Categories),
❏ Current Category.
7. Click OK to print the selected report.
To exit Compaq Diagnostics for Windows NT, click File, then click Exit.