Filter
Top Products
Percentage Copied
The percentage of the array data that has been copied onto the coupled disk
drives. When this reaches 100%, the coupled disk drives contain an exact
copy of the data that is on the array, and can be uncoupled at any time from
the array.
For fields that are not defined here, see “Changing or Showing the Attributes of an SSA
RAID Array” on page 135.
The following information is displayed for RAID-Copy arrays:
Change/Show Attributes of an SSA RAID Array
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
SSA RAID Manager ssa1
SSA RAID Array hdisk9
Connection Address / Array Name 8A8E39197D02C4T
RAID Array Type raid_copy
State good
Size of Array 18.2GB
Member Disks pdisk11 pdisk12
Parent Array hdisk2
Copy Uncoupled Thu May 11 09:31:11 20>
Allow Page Splits yes +
Current Use System Disk +
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
The meanings of the additional fields are:
State The status of the RAID-Copy array. Valid values for status are:
Good All the array components are present and operational.
Offline One or more array members are missing or have failed.
Unknown
A RAID-Copy array has been created, but has not been coupled to an
array. An hdisk cannot be created from this RAID-Copy array. This
RAID-Copy array can be only coupled to an array or deleted.
Parent Array
The name of the array from which the data was copied.
Copy Uncoupled
The date and time when the copy uncoupled from the parent array.
For fields that are not defined here, see “Changing or Showing the Attributes of an SSA
RAID Array” on page 135.
Chapter 7. Copying Data from Arrays and from Volume Groups 187
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
||
||
|
|
|
|
|
|
|
|
|
|