2. Select the hdisk or pdisk that you want to verify.
3. If you select an hdisk, a list of pdisks is displayed:
CONFIGURATION VERIFICATION 802391
systemname:hdisk2 AC51DB47 SSA Logical Disk Drive Good
To set or reset Identify, move cursor onto selection, then press <Enter>.
Physical Serial# Adapter Port SSA_Addr Status
systemname:pdisk0 AC51DB47 00-02 A1 0 Good
00-02 A2 1 Good
F3=Cancel F10=Exit
If you select a pdisk, a list of hdisks is displayed:
CONFIGURATION VERIFICATION 802392
systemname:pdisk0 AC51DB47 4GB SSA C Physical Disk Drive
Move cursor onto selection, then press <Enter>.
systemname:hdisk2 AC51DB47 SSA Logical Disk Drive Good
F3=Cancel F10=Exit
Note: If you select the hdisk from this screen, the hdisk configuration is displayed.
388 User’s Guide and Maintenance Information