3. Select the disk drive that you want to designate as a hot spare.
The following screen is displayed for the disk drive that you have chosen:
Change/Show Attributes of an SSA Physical Disk
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
SSA RAID Manager ssa0
SSA physical disk pdisk6
CONNECTION address 08005AEA080800D
Current use Hot Spare Disk +
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
Move the cursor to Current Use, and press the List key.
Note: If the Current Use field shows that the disk drive is owned by an array, you
cannot change that use.
4. Select Hot Spare Disk in the Current Use field.
5. Press Enter.
Chapter 6. Using the RAID Array Configurator 73