2. Select the pdisk that you want to identify or put into Service Mode (for example,
pdisk3). The following display appears with details of the disk drive that you have
just selected:
SET SERVICE MODE 802382
systemname:pdisk0 AC50AE43 4GB SSA C Physical Disk Drive
Move cursor onto selection, then press <Enter>.
+ Set or Reset Identify.
Select this option to set or reset the Identify indicator
on the disk drive.
> Set or Reset Service Mode.
Select this option to set or reset Service Mode on the
disk drive.
ENSURE THAT NO OTHER HOST SYSTEM IS USING THIS DISK DRIVE
BEFORE SELECTING THIS OPTION.
F3=Cancel F10=Exit
380 User’s Guide and Maintenance Information