Filter
Top Products
Adding and Replacing Parts 123
Keyboard
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1
Follow the procedures in "Before You Begin" on page 111.
2
Open the display.
3
Remove the hinge cover. See "Hinge Cover" on page 122.
1 hinge cover 2 scribe
1
2
book.book Page 123 Tuesday, July 3, 2007 12:31 PM