Filter
Top Products
Setting Up a Network 65
Setting Up a Network
Physically Connecting to a Network or
Broadband Modem
Before you connect your computer to a network that is not wireless, the
computer must have a network adapter installed and a network cable
connected to it.
To connect a network cable:
1
Connect the network cable to the network adapter connector on the back
of your computer.
NOTE: Insert the cable connector until it clicks into place, and then gently pull the
cable to ensure that it is securely attached.
2
Connect the other end of the network cable to a network connection
device or a network wall connector.
NOTICE: Do not use a network cable with a telephone wall connector.
book.book Page 65 Tuesday, July 3, 2007 12:31 PM