Filter
Top Products
102 Speakers
Replacing the Speakers
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the screw holes on the speakers with the screw holes on the chassis.
3
Replace the four screws (two on each speaker) that secure the speakers to
the chassis.
4
Route the speakers cable and connect the speakers cable to the connector
on the system board.
5
Replace the system-board shield. See "Replacing the System-Board Shield"
on page 54.
6
Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
7
Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.
8
Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
on page 36.
9
Replace the back cover. See "Replacing the Back Cover" on page 21.
1 speakers (2) 2 screws (4)
3 speakers cable
1
2
3
book.book Page 102 Thursday, May 3, 2012 1:21 PM