Filter
Top Products
Audio Video Board 45
Replacing the Audio Video (AV) Board
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the screw holes on the AV board with the screw holes on the chassis.
3
Replace the five screws that secure the AV board to the chassis.
4
Connect the AV-board cables to the connectors on the AV board.
5
Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
6
Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
on page 36.
7
Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
8
Connect your computer and all attached devices to electrical outlets, and
turn them on.
1 AV board 2 AV-board cables (2)
3 screws (5)
1
3
2
book.book Page 45 Thursday, May 3, 2012 1:21 PM