Filter
Top Products
40 I/O Board Cover
Replacing the Rear I/O Cover
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the screw holes on the rear I/O cover with the screw holes on the
chassis.
3
Replace the four screws that secure the rear I/O cover to the chassis.
4
Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
on page 36.
5
Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
6
Connect your computer and all attached devices to electrical outlets, and
turn them on.
1 rear I/O cover 2 screws (4)
1
2
book.book Page 40 Thursday, May 3, 2012 1:21 PM