Filter
Top Products
48 Main Chassis
.
Replacing the Converter Board
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the screw holes on the converter board with the screw holes on the
chassis.
3
Replace the two screws that secure the converter board to the chassis.
4
Connect the converter-board cable to the connector on the converter
board.
5
Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
6
Replace the VESA mount. See "Replacing the VESA Mount" on page 38.
7
Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
on page 36.
8
Replace the back cover. See "Replacing the Back Cover" on page 21.
1 screws (2) 2 converter-board cable
3 converter-board connector
2
1
3
book.book Page 48 Thursday, May 3, 2012 1:21 PM