Filter
Top Products
Back Cover 21
5
Place the back cover in a secure location.
Replacing the Back Cover
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the tabs on the top of the back cover with the slots on the middle
frame.
3
Align the tabs on the sides of the back cover with the slots on the middle
frame and then fix the back cover into place.
4
Replace the six screws that secure the back cover to the computer.
5
Place the computer in an upright position.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
6
Connect your computer and all attached devices to electrical outlets, and
turn them on.
book.book Page 21 Thursday, May 3, 2012 1:21 PM