Filter
Top Products
98 Antenna-In Connector
Replacing the Power-Button Board
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the screw hole on the power-button board with the screw hole on the
chassis.
3
Replace the screw that secures the power-button board to the chassis.
4
Connect the power button and hard-drive activity light cable to the
connectors on the power-button board, the AV board, and the system
board.
5
Replace the system-board shield. See "Replacing the System-Board Shield"
on page 54.
6
Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
7
Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.
8
Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
on page 36.
9
Replace the back cover. See "Replacing the Back Cover" on page 21.
1 screw 2 power-button board
3 power-button and hard-drive activity light cable
1
2
3
book.book Page 98 Thursday, May 3, 2012 1:21 PM