Filter
Top Products
110 Display
12
Make a note of the camera cables, touch-screen control board cables,
backlight cable, and LVDS cable routing.
NOTE: The location of the LVDS connector may vary depending on the computer
configuration.
13
Disconnect the cables from the connectors on the system board,
touch-screen control board, AV board, and the converter board.
14
Remove the middle frame. See "Removing the Middle Frame" on page 71.
15
Remove the five screws that secure the chassis to the display assembly.
16
Remove the 13 screws that secure the chassis to the display bezel.
1 touch-screen control board cables
(optional) (2)
2 camera cable
3 IR receiver cable (optional) 4 LVDS cable
5 backlight cable
5
2
1
4
3
book.book Page 110 Thursday, May 3, 2012 1:21 PM