Filter
Top Products
36 Rear Stand Cover
Replacing the Rear-Stand Assembly
1
Follow the instructions in "Before You Begin" on page 11.
2
Place the rear-stand assembly on the chassis and slide it to the top of the
computer.
3
Replace the two screws that secure the rear-stand assembly to the chassis.
4
Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
5
Connect your computer and all attached devices to electrical outlets, and
turn them on.
1 rear-stand assembly 2 screws (2)
1
2
book.book Page 36 Thursday, May 3, 2012 1:21 PM