Filter
Top Products
52 B-CAS Card
Replacing the B-CAS Card
1
Follow the instructions in "Before You Begin" on page 11.
2
Connect the B-CAS card cable to the connector on the B-CAS card.
3
Align the screw hole on the B-CAS card with the screw hole on the chassis.
4
Replace the screw that secures the B-CAS card to the chassis.
5
Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
6
Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
on page 36.
7
Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
8
Connect your computer and all attached devices to electrical outlets, and
turn them on.
1 B-CAS-card 2 B-CAS card cable
3 screw
3
2
1
book.book Page 52 Thursday, May 3, 2012 1:21 PM