Filter
Top Products
132 System Setup Utility
NOTE: If you wait too long and the operating system logo appears, continue to wait
until you see the Microsoft Windows desktop. Then shut down your computer and
try again.
The
Boot Device Menu
appears, listing all available boot devices.
4
On the
Boot Device Menu
choose the device you want to boot from.
For example, if you are booting to a USB memory key, highlight
USB
Storage Device
and press <Enter>.
NOTE: To boot to a USB device, the device must be bootable. To ensure your
device is bootable, check the device documentation.
Changing Boot Sequence for Future Boots
1
Enter system setup. See "Entering System Setup" on page 125.
2
Use the arrow keys to highlight the
Boot
menu option and press <Enter>
to access the menu.
NOTE: Write down your current boot sequence in case you want to restore it.
3
Press the up- and down-arrow keys to move through the list of devices.
4
Press plus (+) or minus (–) to change the boot priority of the device.
Clearing Forgotten Passwords
WARNING: Before you begin any of the procedures in this section, follow the
safety instructions that shipped with your computer.
WARNING: The computer must be disconnected from the electrical outlet to
clear the CMOS setting.
CAUTION: Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
1
Follow the instructions in "Before You Begin" on page 11.
2
Remove the back cover. See "Removing the Back Cover" on page 19.
3
Remove the rear-stand assembly. See "Removing the Rear-Stand Assembly"
on page 35.
book.book Page 132 Thursday, May 3, 2012 1:21 PM