Filter
Top Products
Processor 85
3
If the release lever on the socket is not fully extended, move it to that
position.
4
Orient the alignment notches on the processor with the alignment tabs on
the socket.
5
Align the pin-1 corners of the processor and socket.
CAUTION: Ensure that the processor cover notch is positioned underneath the
alignment post.
6
When the processor is fully seated in the socket, close the processor cover.
7
Pivot the release lever down and place it under the tab on the processor
cover.
1 socket 2 processor
3 alignment tabs (2) 4 alignment notches (2)
5 processor pin-1 indicator
1
2
3
4
5
book.book Page 85 Thursday, May 3, 2012 1:21 PM