Filter
Top Products
118 Camera
Replacing the Camera Module
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the screw holes on the camera module with the screw holes on the
camera-module assembly.
3
Replace the two screws that secure the camera module to the
camera-module assembly.
4
Place the camera-module assembly on the display bezel and connect the
camera cable to the camera-cable connector on the camera-module
assembly
5
Follow the instructions from step 2 to step 17 in "Replacing the Display
Assembly" on page 111.
6
Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 camera-module assembly 2 screws (2)
3 display bezel 4 camera-cable connector
4
1
2
3
book.book Page 118 Thursday, May 3, 2012 1:21 PM