Filter
Top Products
10D-Link DSL-2770L User Manual
Section 2 - Installation
Connecting the DSL-2770L
1. Position your router close to your modem and a computer.
Place the router in an open area of your intended work area
for better wireless coverage.
2. Connect your DSL phone line to the DSL port.
3. Plug the included Ethernet cable into your PC’s Ethernet
port. Plug the other end of the cable into one of the four
LAN ports on the DSL-2770L.
4. Connect the supplied power adapter into the power
receptor on the back of the router and then plug it into a
power outlet or surge protector. Press the power button
and verify that the power LED is lit. Allow 1 minute for the
router to boot up.
To continue on to conguring the DSL-2770L, refer to “Web-based
Conguration Utility” on page 15.
Connecting to another modem or Internet line: If you are
connecting the DSL-2770L to another modem or a wired Internet
connection, connect the Ethernet cable from your Internet source
to port 4 on the DSL-2770L. Refer to “Ethernet/3G WAN Interface”
on page 26 for setup details.
Connecting to a 3G USB adapter: If you are connecting a 3G
USB adapter to use for your Internet connection, plug it into the
USB port. Refer to “Ethernet/3G WAN Interface” on page 26 for setup
details.
USB
WPS
1
2
3
4
INTERNET
POWER
INTERNET
DSL-2770L
Modem
Computer