D-Link DSL-2770L Network Router User Manual


  Open as PDF
of 122
 
36D-Link DSL-2770L User Manual
Section 3 - Conguration
Wi-Fi Protected Setup
If you clicked on the Wi-Fi Protected Setup button on the Wireless Setup page, you
will see this screen. The Wi-Fi Protected Setup page allows you to create a wireless
connection between your router and a device automatically by simply pushing a button
or entering a PIN code.
You can also use Windows 7 to do initial conguration of your router by using the
Connect to a network wizard in Windows, and entering the WPS PIN/AP PIN of the
router when prompted. After modifying any settings, click Save Settings to save your
changes.
Select whether you would like to enable or disable WPS features.
If you use Windows 7’s Connect to a network wizard to do initial
conguration of the router, you will need to enter the WPS PIN/AP PIN
into the wizard when prompted. The factory default WPS PIN/AP PIN is
printed on a label located on the bottom of the router. You can click the
Generate New PIN button to change it to a randomly generated PIN.
Select whether the WPS cong mode should be set to Registrar or
Enrollee. In most cases, this should be set to Registrar so that you can
use WPS to connect new wireless clients.
If this is set to CONFIGURED, the router will be marked as “already
congured” to computers that try to use WPS conguration, such as
Windows 7’s Connect to a network wizard. You can click the Release
button to change the status to UNCONFIGURED to allow for WPS
conguration of the router.
If this is set to UNCONFIGURED, you can click the Set button to change
the status to CONFIGURED to block WPS conguration of the router.
This lets you choose whether to use the Push Button connection
method (PBC) or PIN method to connect to a wireless client when the
Trigger button is clicked. If you choose the PIN method, you will need
to enter an 8-digit PIN number that the wireless client need to use to
connect to your router.
This will show the current WPS connection process status. Click the
Trigger button to initiate a WPS connection.
WPS:
AP PIN (also known
as WPS PIN):
Cong Mode:
Cong Status:
Cong Method:
WPS Status:
 previous next