Filter
Top Products
66D-Link DSL-2770L User Manual
Section 3 - Conguration
Outbound Filters
The Outbound Filter option is an advanced method of controlling data sent out to the Internet. With this feature you can
congure outbound data ltering rules that control data based on an IP address range. Select whether to Allow all trac
specied by your rules to pass, or to Deny all trac specied by your rules.
Enter the starting IP address and ports from your network. Enter 0.0.0.0
if you do not want to specify an IP range.
Enter the ending IP address and ports outside your network. Enter
255.255.255.255 if you do not want to specify and IP range.
Check this box to enable the rule.
Enter the schedule rule number that you want to apply to this port
forwarding rule. You can create a new schedule by clicking the Add
New Rule... button, or you can leave it blank to allow the rule to be
always on.
For more details on creating schedule rules, refer to “Schedules” on
page 85
Source IP:Ports:
Destination
IP:Ports:
Enable:
Schedule Rule#: