Filter
Top Products
21D-Link DSL-2770L User Manual
Section 3 - Conguration
Select Static IP if your ISP assigned you an IP address, subnet mask,
gateway, and DNS server address. In most cases, select Dynamic IP.
Enter the Primary and secondary DNS server IP addresses assigned by
your ISP.
If your ISP requires you to enter a MAC address, ll it in here. You can click
the Clone MAC button to enter your current computer’s MAC address.
If you experience connection issues, you may need to change the
MTU setting for optimal performance with your specic ISP. 1500 is
the default MTU.
Check this to enable the router to use NAT to assign IP addresses for
your devices.
Address Mode
Primary/Secondary
DNS Server:
MAC Address:
MTU:
Enable NAT:
Ethernet Over ATM(RFC1483 Bridged) with NAT