Filter
Top Products
17D-Link DSL-2770L User Manual
Section 3 - Conguration
Select the WAN interface to congure, and whether to enable or disable
it.
Select the WAN connection type for your ISP. Based on which connection
type you choose, dierent settings will be displayed below. These
settings are described on the following pages after the Setup Wizard
pages.
• Ethernet Over ATM(RFC1483 Bridged) with NAT
• IP over ATM(RFC 1483 Routed)
• PPP over Ethernet
• PPP over ATM
• RFC 1483 Bridged
Enter a host name to use for your connection.
WAN Interface
My Internet
Connection Is:
Host Name:
ADSL Interface
If you clicked the Setup button for ADSL Interface, you will see the following settings. You can click the Setup Wizard button to use a step by step
wizard that guides you through conguration of your ADSL settings. See the following pages for how to use the Setup Wizard. If you are not sure
what settings to use, please contact your Internet Service Provider.
The settings displayed in the middle will vary depending on what you select for the My
Internet Connection Is setting. See the following pages for details.
Select VCMux or LLC based on your ISP’s recommended settings.
Selecting your country and ISP provider from the dropdown boxes will
automatically ll in the VPI and VCI numbers for you.
Enter the VPI number specied by your ISP.
Enter the VCI number specied by your ISP.
Select UBR, CBR, VBR, or GFR based on your ISP’s recommended settings.
You can set multicast mode to Auto, IGMP v1, IGMP v2, or IGMP v3.
You can enable the IGMP snooping function by checking this box.
You can enable and specify the VLAN TAG if required by your ISP.
Data
Encapsulation:
Country/ISP
Provider:
VPI Number:
VCI Number:
Schedule type:
Multicast:
IGMP Snooping:
VLAN TAG: