Filter
Top Products
26D-Link DSL-2770L User Manual
Section 3 - Conguration
Ethernet/3G WAN Interface
If you clicked the Setup button for Ethernet/3G WAN Interface, you will see the following settings. You can click the Setup Wizard button to use
a step-by-step wizard that guides you through conguration of your WAN settings. If you are not sure what settings to use, please contact your
Internet Service Provider.
Select the WAN interface to congure, and whether to enable or disable
it.
Select Static IP, DHCP, PPoE, PPTP, L2TP, or 3G(through a USB adapter).
Based on the setting you choose, the following settings will be dierent.
Enter a host name to use for your connection.
WAN Interface:
My Internet
Connection Is:
Host Name:
The settings displayed in the middle will vary depending on what you select for the My
Internet Connection Is setting. See the following pages for details.
Select what multicast mode to use (Auto/IGMP v1/IGMP v2/IGMP v3),
or if you want to disable it.
Check this box if you want to enable IGMP Snooping.
To set a VLAN tag, check this box, then enter the VLAN TAG to use.
Multicast:
IGMP Snooping:
VLAN TAG: