Filter
Top Products
72D-Link DSL-2770L User Manual
Section 3 - Conguration
Advanced Wireless
Specify a value for the beacon interval. Beacons are packets sent by
an Access Point to synchronize a wireless network. 100 is the default
setting and is recommended.
Set the transmit power of the antennas.
This value should remain at its default setting of 2347. If inconsistent
data ow is a problem, only a minor modication should be made.
The fragmentation threshold, which is specied in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346 is the default
setting.
Set the interval for DTIM. A Delivery Trac Indication Message (DTIM)
is a countdown informing clients of the next window for listening to
broadcast and multicast messages. The default interval is 3.
WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for your
wireless network. Enable this option to improve the quality of video
and voice applications for your wireless clients.
Select the basic transfer rates based on the speed of wireless adapters
on your wireless network. It is strongly recommended to keep this
setting to Auto.
Here, you can set up a Wireless Guest Network, which will provide access
to the Internet, but not to your network devices. To use this feature, tick
the Enable Wireless Guest Network checkbox. For more details, refer
to “Wireless Settings” on page 34.
Beacon Interval:
Transmit Power:
RTS Threshold:
Fragmentation:
DTIM Interval:
WMM Capable:
TX Rates:
Guest Wireless
Settings:
This page allows you to change some of the advanced wireless settings of the DSL-2770L. It is recommended that you only
change these settings if you are familiar with their functions and proper settings, or are instructed to do so.