Filter
Top Products
101
PC-80 driver settings
1
Use the USB cable to connect the PC-80 to your computer.
2
Turn on the PC-80’s power switch.
3
Open
Control Panel
.
Click the Windows
Start
menu, and from the menu that appears, select
Settings
|
Control Panel
.
4
Open the
Sounds and Multimedia Properties
.
In
Control Panel
, double-click the
Sounds and Multimedia
icon to open the
Sounds and Multimedia Properties
dialog box.
5
Click the
Audio
tab.
fig.2K-E
6
In each of the
Sound Playback
,
Sound Recording
, and
MIDI Music
Playback
areas, click the
Preferred
device field
and choose the following
devices from the list that appears.
* In
MIDI music playback
, choose one of the
three devices that appears. If you’re using Media
Player, choose
EDIROL PC-80 Player
.
* For more about each device, refer to
“MIDI DEVICES”
(p. 99).
7
Close the
Sounds and Multimedia
Properties
dialog box.
Click
[OK]
to complete the settings.
Windows 2000 users
Sound Playback
EDIROL PC-80
Sound
Recording
EDIROL PC-80
MIDI Music
Pslayback
EDIROL PC-80 MIDI
OUT
EDIROL PC-80 Synth
EDIROL PC-80 Player
In order to make device
settings, you must have
already installed the
driver.
(➔“Installation and
settings (Windows)” (p.
16)
Choose the device that’s
appropriate for your
system. You do not
necessarily have to choose
the devices shown at the
left.
If you’re using sequencer
software, you’ll need to
make audio and MIDI
device settings from
within your software. For
details, refer to the owner’s
manual of the software
you’re using.
PC-80_e.book 101 ページ ２００５年１１月１０日 木曜日 午前１１時３４分