Filter
Top Products
65
Using the PC-80 as a MIDI controller keyboard
■
Transmitting a bank select LSB message
Here’s how to transmit a
bank select LSB
(CC#32) message on the current channel
(p. 62).
When you do this, the most recently transmitted
bank select MSB
message and
Program
Change message
you transmitted (specified) as described in
“Transmitting a bank select
MSB message”
(p. 66) and
“Transmitting a program change message”
(p. 64) will also be
transmitted.
fig.BANK-1_75
fig.util*
1
Simultaneously hold down the
MIDI CH
button and
PGM CHANGE
button for a few moments.
The display will indicate “UTL” and you will be in Utility mode.
2
Press the keyboard key marked
[BANK LSB]
.
fig.BANK-3
3
Use the
VALUE encoder
or the keyboard keys marked
[0]
–
[9]
to specify the Bank
Select LSB you want to transmit.
fig.enter
4
Press the
ENTER
button.
* If you press another button without pressing the
ENTER
button, the transmission will be
cancelled.
The
Bank Select LSB
message has been sent.
21
4
3
*1 Reference
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
PC-80_e.book 65 ページ ２００５年１１月１０日 木曜日 午前１１時３４分