Filter
Top Products
109
PC-80 driver settings
■
Adjusting the recording margin
If you still experience clicks or noise during playback or recording even after adjusting the audio buffer
size in the software you’re using, you can increase the recording margin here.
1
As described in
“Accessing the EDIROL PC-80 Driver Settings panel”
(p. 107), open the
EDIROL PC-80 Driver Settings
dialog box.
2
Adjust the
“Recording Margin.”
By clicking
▲
to increase the margin setting, you can reduce
the occurrence of clicks or noise.
3
Enable the PC-80 software synthesizer.
1.
Hold down the
Control
key and click the
PC-80 Software
Synthesizer icon
shown in the Dock.
2.
From the menu that appears, choose
Disable Synth
to
clear the check mark.
3.
A dialog box indicating
“Enable the PC-80 Software
Synthesizer”
will appear.
Click
[OK]
.
* After you change a setting in the
EDIROL PC-80 Driver Settings
dialog box, you must restart any software
that uses the PC-80. If you are using software that has an audio device test function, please execute the test
function.
PC-80_e.book 109 ページ ２００５年１１月１０日 木曜日 午前１１時３４分