Filter
Top Products
96
System settings for the PC-80
List of parameters that can be assigned
6
Press the
ENTER
button.
Key Display Parameter Contents of setting
VOLUME
Assigns the VOLUME parameter to the Value Encoder.
VOLUME: 0–127
PANPOT
Assigns the PANPOT parameter to the Value Encoder.
PANPOT: 0–127
TEMPO
Assigns the tempo of the F8 Clock messages to the Value Encoder.
TEMPO: 20–250
COARSE TUNING
Assigns the COARSE TUNING parameter to the Value Encoder.
COARSE TUNING: 0–127
FINE TUNING
Assigns the FINE TUNING parameter to the Value Encoder.
FINE TUNING: 0–127
AFTERTOUCH
Assigns the AFTERTOUCH parameter to the Value Encoder.
AFTERTOUCH: 0–127
CONTROL CHANGE
Assigns the CONTROL CHANGE parameter to the Value Encoder.
CONTROL CHANGE: 0–127
CHORUS LEVEL
Assigns the CHORUS LEVEL parameter to the Value Encoder.
CHORUS LEVEL: 0–127
REVERB LEVEL
Assigns the REVERB LEVEL parameter to the Value Encoder.
REVERB LEVEL: 0–127
KEY VELOCITY
Assigns the KEY VELOCITY parameter to the Value Encoder.
In KEY VELOCITY MODE, the velocity value is fixed.
The PC-80 transmits velocity values that correspond to the force
with which you play the keyboard, but if KEY VELOCITY is as-
signed to the Value Encoder, the fixed velocity value you specify
using the Value Encoder will be transmitted regardless of how
you actually play the keyboard. Use KEY VELOCITY MODE if
you don’t want the velocity values to be affected by how you
play the keyboard.
KEY VELOCITY: tch, 1–127
* If you use the Value Encoder to set the value to “tch”, the trans-
mitted velocity will correspond to the force with which you actu-
ally play the keyboard.
PC-80_e.book 96 ページ ２００５年１１月１０日 木曜日 午前１１時３４分