Filter
Top Products
76
Using the PC-80 as a MIDI controller keyboard
■
Transmits a Reset message
If you experience “stuck notes
”
or other problems with the external MIDI sound module that’s
connected, you can transmit a
Reset message
to solve the problem.
This operation will transmit
All Sound Off
,
All Notes Off
, and
Reset All Controllers
messages
on all channels.
fig.panic-1_80
fig.util*
1
Simultaneously hold down the
MIDI CH
button and
PGM CHANGE
button for a few moments.
The display will indicate “UTL
”
and you will be in Utility mode.
fig.pnc
2
Press the keyboard key marked
[PANIC]
.
The indication “PNC
”
starts blinking in the display.
fig.enter
3
Press the
ENTER
button.
* If you press a different button without pressing the
ENTER button
, the setting will be
cancelled.
The
Reset message
has been sent.
213
PC-80_e.book 76 ページ ２００５年１１月１０日 木曜日 午前１１時３４分