Filter
Top Products
116
Troubleshooting
Could you have headphones connected?
If headphones are connected, there will be no sound from the PC-80’s built-in speakers.
(
➔
“Input/output device settings”
(p. 100)
Is the input level knob raised appropriately?
Turn the knob toward the right to adjust the volume.
Is the master volume knob raised appropriately?
Turn the knob toward the right to adjust the volume.
Could the Direct Monitor button be turned off?
Turn the Direct Monitor button on.
Did you specify the correct audio data input source within the operating system?
Depending on the software you are using, you may need to specify the PC-80 as the audio data input source
for your computer.
Does your software support 24-bit audio data?
You will need to use software that supports 24-bit audio data.
Is your software set to record/play 24-bit audio data?
Set your software to 24-bit.
Have you made the correct settings for the MIDI device you’re using?
In order to record/play MIDI via the PC-80, you must install the PC-80 driver correctly.
In addition, you must also make settings in your software to specify the MIDI device you want to use.
(
➔
“Input/output device settings”
(p. 100)
Can’t hear sound from equipment connected to the input jacks
Recording produces a silent file
Can’t record/play 24-bit audio data
Can’t record/play MIDI
PC-80_e.book 116 ページ ２００５年１１月１０日 木曜日 午前１１時３４分