Filter
Top Products
112
PC-80 driver settings
On the Macintosh, you can use PC-80_Uninstaller (located in the Driver folder of the CD-ROM)
to uninstall the driver.
Refer to Readme_E.txt on the CD-ROM along with the explanation that follows.
1
Disconnect all USB cables from your Macintosh (with the exception of those
for a USB keyboard and USB mouse), and start up the Macintosh.
2
Close the PC-80 software synthesizer.
1.
Hold down the Control key and click the
PC-80 Software Synthesizer icon
shown in
the Dock.
2.
From the menu that appears, choose
Exit
.
3
Place the PC-80 software CD-ROM in the CD-ROM drive of your Macintosh.
4
In the
Driver
folder of the CD-ROM, double-click
PC80_Uninstaller
.
5
The message
“This uninstalls EDIROL PC-80 Driver from this Macintosh.”
will appear.
Click
[Uninstall]
.
* If any other message appears, proceed as directed by that message.
6
The display will indicate
“Are you sure to uninstall the driver?”
Click
[OK]
.
7
The
“Authenticate”
dialog box will appear.
Enter the password, and press
[OK]
.
8
The display will indicate
“Uninstallation is completed.”
Click
[Restart]
to restart your Macintosh.
Macintosh users
PC-80_e.book 112 ページ ２００５年１１月１０日 木曜日 午前１１時３４分