Filter
Top Products
89
System settings for the PC-80
Here you can make system settings for the PC-80.
System setting items
System settings
Key Display Mode Contents of setting Factory
setting
Procedure
0
F8 CLOCK ON/
OFF
Determines whether or not F8 Clock will be
transmitted.
OFF p. 90
1
F8 CLOCK
DEFAULT TEMPO
If “F8 CLOCK ON/OFF” is on, this speci-
fies the initial tempo of the F8 Clock. After
the power is turned on, this tempo will be
transmitted until you move the VALUE en-
coder to which Tempo has been assigned.
120 p. 91
2
VELOCITY CURVE
When you play the PC-80’s keyboard, ve-
locity values corresponding to the force
with which you strike the keys will be
transmitted. The Velocity Curve setting
specifies the keyboard sensitivity and how
velocity values will change in response to
your playing strength.
1-MEDIUM p. 92
3
KEY VELOCITY
Specifies whether the velocity value will be
fixed or whether it will vary according to
the Velocity Curve you selected.
TOUCH p. 93
4 MIDI I/F MODE
Specifies whether the PC-80 will operate as
a MIDI interface via its MIDI connectors.
ON p. 94
5
VALUE ENCODER
Specifies the parameter that will be trans-
mitted when you operate the VALUE en-
coder.
VOLUME p. 95
6
FACTORY RESET
Restores all of the PC-80’s setting to the fac-
tory-set condition.
– p. 97
7
MIDI ADVANCED
DRIVER ON/OFF
Specifies the type of USB MIDI driver that
will be used when connected via USB.
ON p. 98
PC-80_e.book 89 ページ ２００５年１１月１０日 木曜日 午前１１時３４分