Filter
Top Products
EPSON Stylus PHOTO 810/820/830 Revision B
PRODUCT DESCRIPTION SPECIFICATIONS 12
1.2.5 Printing Area
1.2.5.1 Cut Sheet
Refer to the following table. As for each margin area, refer to Figure 1-3.
* Bottom margin can be set to 3mm when the paper length is designated with
“ESC (S” command). However, the printing quality is not guaranteed in the
area, ranging from 3mm to 14mm, from the form lower end. When the paper
length is not designated, the bottom margin must be wider than 14mm.
(Printable area A)
** When all margins (Left / Right / Top / Bottom) can be set to 0mm at minimum
only when the “no margin” is checked on the printer driver. However, the
printing quality is not guaranteed in the area, ranging from 0mm to 3mm,
from the form lower end.
Figure 1-3. Printable area for cut sheet
Table 1-8. Printing area
Paper size
Left margin
(min.) **
Right margin
(min.) **
Top margin
(min.) **
Black bottom margin
(min.) **
A4 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Letter 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
B5 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Legal 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Statement 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Executive 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Printable area A
LM
RM
PW
TM
BM
PL
Printable area B