Filter
Top Products
100 Control Panel
Note:
You can scroll the menu by holding the ItemU (Font) or ItemD
(Pitch) button for a few seconds.
7. Press the SetU (Tear Off) or SetD (Top of Form) button to
select the values within the selected parameter until you find
the desired setting.
Note:
You can scroll the value by holding the SetU (Tear Off) or SetD
(Top of Form) button for a few seconds.
8. After setting the selected parameter to the desired setting, you
may either continue to make changes to other parameters by
pressing the ItemD or ItemU button, or exit the SelecType
mode.
Note:
The menu selection returns to the first menu after the selection of
the last menu parameter is done.
9. When you finish making settings, press the Menu (Tear Off
and Top of Form) buttons.
10. The LCD displays Save Setting. If you want to save the
settings, select Yes by pressing the SetU (Tear Off) button. If
you do not want to save the settings, select No by pressing the
SetD (Top of Form) button.
The printer exits the SelecType mode.
Note:
If you turn off the printer prior to exiting the SelecType mode, any
changes you may have made are canceled and not saved.