Filter
Top Products
Control Panel 85
4
4
4
4
4
4
4
4
4
4
4
4
iTop of Form (SetD) button
❏ Enters the top-of-form position mode and sets the
new top-of-form position after it has been adjusted
with the Micro Feed buttons.
❏ When the printer enters the SelecType mode and
default setting mode, the button works as the SetD
button. You can press the SetD button to select the
next value of a setting item. See “Changing the
printer’s settings” on page 98 for details.
Top of Form light
On when the printer is in the top-of-form and tear-off
modes.
j LF/FF Load button
❏ Loads continuous paper when the printer is out of
paper.
❏ Feeds paper line by line when pressed briefly.
❏ Advances continuous paper to the next top-of-form
position when held down for a few seconds.
k Micro Feed buttons
Adjust the paper position, such as the top-of-form
position and tear-off position.