Filter
Top Products
Control Panel 99
4
4
4
4
4
4
4
4
4
4
4
4
Follow these steps to enter the SelecType mode and change the
settings:
Note:
If you turn off the printer prior to exiting the SelecType mode, any
changes you may have made are canceled and not saved.
1. Make sure paper is loaded.
2. Press the Menu (Tear Off and Top of Form) buttons to enter
the SelecType mode.The LCD displays the selected language
for this mode.
3. If the language you want is not selected, press the SetU (Tear
Off) or SetD (Top of Form) button until the LCD displays the
language you want.
4. Press the ItemD (Pitch) button to set the desired language.
Note:
The language you select is also used for other settings, modes, and
test print outs, such as default-settings mode and printing a Hex
Dump.
5. If you select Print Settings, press the SetD (Top of Form)
button to print the current settings.
6. Press the ItemU (Font) or ItemD (Pitch) button to select the
menu parameters which you wish to change.
ItemD (Pitch) button Selects the next menu parameter.
SetU (Tear Off) button Select the previous value in the selected menu.
SetD (Top of Form)
button
Select the next value in the selected menu.
Button Basic function