Filter
Top Products
94 Control Panel
Serial data length
This setting is available only when data is transferred via a serial
interface. Set the data length of the serial interface to 8-bit or
7-bit. See your computer manual and software documentation
for the proper setting.
Character table
You can select among various character tables including several
international character sets for the italic character table. This
setting is used when you print without using the printer driver.
When using the printer driver, change the settings on the printer
driver. For details, see “Printer Driver Settings Overview” on
page 54.
Auto CR (IBM PPDS)
This setting is available only in IBM PPDS emulation mode. When
auto carriage return is on, each line feed (LF) code or ESC J code
is accompanied by a carriage return (CR) code so the printer
moves the next printing position to the left margin. When this
setting is off, you must send a CR code after the line feed code to
move the printing position to the left margin.
IBM character table (IBM PPDS)
This setting is available only in IBM PPDS emulation mode. You
can select Table 2 or Table 1 for the IBM character table.
Buzzer
The printer beeps when an error occurs. See “Using the error
indicators” on page 105 for more information on printer errors. If
you do not want the printer to beep when an error occurs, turn
off this setting.