Filter
Top Products
Control Panel 95
4
4
4
4
4
4
4
4
4
4
4
4
Low-noise mode
When this mode is set to On, the noise is reduced, but the printing
speed is slower.
Auto cut mode
This function is available only when the optional perforation
cutter (#C81570X) is installed in the printer. When this setting is
set to On, the perforation cutter cuts each page at the perforation
automatically. Note the following when you turn on this
functions:
❏ Make sure the paper is at least 4 inches long.
❏ Do not change the top of form position using the Top of Form
button.
❏ Do not feed the paper using the Micro Feed buttons.
❏ Never cut labels, continuous paper with labels, and
overlapping multi-part forms.
❏ If you set the cutting method through the printer driver’s
paper source setting, it overrides Auto cut mode.
Auto cut/back mode
This function is available only when the optional perforation
cutter (#C81570X) is installed in the printer. When you turn on
this feature, the printer automatically cuts each page at the
perforation and feeds the paper to the top-of-form position while
it is printing.
Overlapping multipart forms
When this setting is set to On, you can print on overlapping
multi-part forms that vary in thickness.