Filter
Top Products
Safety Instructions 9
1
1
1
1
1
1
1
1
1
1
1
1
Bei Anschluss des Druckers an die Stromversorgung muss
sichergestellt werden, dass die Gebaudeinstallation mit einer
16 A-Sicherung abgesichert ist.
When Handling the paper
❏ Never feed labels backward using the Micro Feedd button.
When fed backward, labels can easily peel off the backing
sheet and cause a paper jam.
❏ Because labels are sensitive to temperature and humidity, use
them only under normal operating conditions described
below:
❏ Do not leave labels loaded in the printer between jobs; they
may curl around the platen and jam when you resume
printing.
❏ Do not load paper that is curled or has been folded.
When operating the printer
❏ Adjust only those controls that are covered in the user
documentation. Improper adjustment of other controls may
result in damage requiring extensive repair by a qualified
technician.
❏ Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise, you may damage the
printer.
❏ Do not turn off the printer while it is printing the self test.
Always press the Pause button to stop printing and then turn
off the printer.
Temperature 15 to 25°C (59 to 77°F)
Humidity 30 to 60% RH