Filter
Top Products
Paper Handling 33
2
2
2
2
2
2
2
2
2
2
2
2
2. Open the paper separator cover (the flap on the top part of the
printer’s top cover). This exposes the printer’s tear-off edge.
3. Press the Tear Off button to enter the tear-off mode. The Tear
Off light comes on and the printer feeds the paper’s
perforation to the printer’s tear-off edge.
4. If the paper is not aligned with the tear-off edge, press the
Micro Feed buttons to feed the paper forward or backward
in 1/216-inch increments. (You can also hold down either
Micro Feed button to feed the paper continuously.)
tear-off-edge